- Projects

nolimips branch master updated: nolimips-0.9-19-g81bf832
by git＠lrde.epita.fr 07 Jan '13

07 Jan '13

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Nolimips, a MIPS simulator with infinitely many registers". The branch master has been updated via 81bf8323f62695c773a7055017d36c9b584feb47 (commit) via 55416eee82780975dcbea4f3a929a8adcdcf99ad (commit) via ff5ce5b15532948717df99e4c3e2872bf8acb552 (commit) via cef56452fce165ac4770410552c70abb89612fe0 (commit) via acc59f3da99130b76215a2289b04ec7fcbf8bc00 (commit) via f0ce61e5f17dd9a7853071a946b8ddda877e55f7 (commit) via a3d879cd9d376ac0e839cc4bdb2e44e2cdfea5b6 (commit) via fb32fd0c402c671fdecb645434f89d87edab0414 (commit) via 89bbed904ef20279d269d2cd27fdf43f8b4c1d62 (commit) from fb8a6d4adfd97265f6c298851a50ef0d6a78a771 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- 81bf832 Add a target to install Nolimips' documentation on the Web. 55416ee Change Nolimips' bug report e-mail address. ----------------------------------------------------------------------- Summary of changes: ChangeLog | 73 +++++++++++ Makefile.am | 3 + build-aux/Makefile.am | 4 +- build-aux/bin/bison++.in | 296 ++++++++++++++++++++++++++++++++++++++++++ build-aux/bin/fuse-switch | 168 ++++++++++++++++++++++++ build-aux/bin/move-if-change | 79 +++++++++++ build-aux/bison++.in | 128 ------------------ build-aux/move-if-change | 18 --- configure.ac | 4 +- doc/Makefile.am | 8 + src/parse/Makefile.am | 36 +++-- 11 files changed, 653 insertions(+), 164 deletions(-) create mode 100755 build-aux/bin/bison++.in create mode 100755 build-aux/bin/fuse-switch create mode 100755 build-aux/bin/move-if-change delete mode 100755 build-aux/bison++.in delete mode 100755 build-aux/move-if-change hooks/post-receive -- Nolimips, a MIPS simulator with infinitely many registers

1 0

nolimips nolimips-0.9-19-g81bf832 Add a target to install Nolimips' documentation on the Web.
by Roland Levillain 07 Jan '13

07 Jan '13

* doc/Makefile.am (install-doc-remote): New target. * Makefile.am (install-doc-remote): New target, delegating to doc/Makefile. --- ChangeLog | 8 ++++++++ Makefile.am | 3 +++ doc/Makefile.am | 8 ++++++++ 3 files changed, 19 insertions(+), 0 deletions(-) diff --git a/ChangeLog b/ChangeLog index 9dbedf0..26d15d2 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,5 +1,13 @@ 2013-01-07 Roland Levillain <roland(a)lrde.epita.fr> + Add a target to install Nolimips' documentation on the Web. + + * doc/Makefile.am (install-doc-remote): New target. + * Makefile.am (install-doc-remote): New target, delegating to + doc/Makefile. + +2013-01-07 Roland Levillain <roland(a)lrde.epita.fr> + Change Nolimips' bug report e-mail address. * configure.ac: Set it to projects(a)lrde.epita.fr. diff --git a/Makefile.am b/Makefile.am index 4adc784..3916f91 100644 --- a/Makefile.am +++ b/Makefile.am @@ -7,3 +7,6 @@ EXTRA_DIST = \ gnulib.modules \ dev/nolimips.xml \ dev/nolimips.py + +install-doc-remote: + cd doc && $(MAKE) $(AM_MAKEFLAGS) $@ diff --git a/doc/Makefile.am b/doc/Makefile.am index 10e8658..3badbb1 100644 --- a/doc/Makefile.am +++ b/doc/Makefile.am @@ -24,3 +24,11 @@ nolimips_TEXINFOS = \ macros.texi \ fdl.texi \ $(FROM_INST_SET_TEXI_GEN_PY) inst-set.texi.stamp + +# Installing the documentation for students. +install_doc_user = akim +install_doc_host = www.lrde.epita.fr +install_doc_dir = www/ccmp/doc +.PHONY: install-doc-remote +install-doc-remote: nolimips.html + scp $^ "$(install_doc_user)@$(install_doc_host):$(install_doc_dir)" -- 1.7.2.5

1 0

nolimips nolimips-0.9-18-g55416ee Change Nolimips' bug report e-mail address.
by Roland Levillain 07 Jan '13

07 Jan '13

* configure.ac: Set it to projects(a)lrde.epita.fr. --- ChangeLog | 6 ++++++ configure.ac | 2 +- 2 files changed, 7 insertions(+), 1 deletions(-) diff --git a/ChangeLog b/ChangeLog index 63e9de1..9dbedf0 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,9 @@ +2013-01-07 Roland Levillain <roland(a)lrde.epita.fr> + + Change Nolimips' bug report e-mail address. + + * configure.ac: Set it to projects(a)lrde.epita.fr. + 2012-10-17 Akim Demaille <akim(a)lrde.epita.fr> build-aux: update tools diff --git a/configure.ac b/configure.ac index 8a3a708..72dd7e4 100644 --- a/configure.ac +++ b/configure.ac @@ -5,7 +5,7 @@ AC_PREREQ([2.59]) ## Project ----------------------------- -AC_INIT([Nolimips], [0.9a], [benoit(a)lrde.epita.fr] +AC_INIT([Nolimips], [0.9a], [projects(a)lrde.epita.fr] ## Setup Autotools --------------------- -- 1.7.2.5

1 0

nolimips nolimips-0.9-13-ga3d879c move-if-change: in colors (no 3d available).
by Akim Demaille 18 Oct '12

18 Oct '12

* build-aux/bin/move-if-change: Sync with Urbi. Signed-off-by: Roland Levillain <roland(a)lrde.epita.fr> --- ChangeLog | 6 +++ build-aux/bin/move-if-change | 81 +++++++++++++++++++++++++++++++++++++---- 2 files changed, 79 insertions(+), 8 deletions(-) diff --git a/ChangeLog b/ChangeLog index c301274..540c335 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,9 @@ +2012-02-17 Akim Demaille <demaille(a)gostai.com> + + move-if-change: in colors (no 3d available). + + * build-aux/bin/move-if-change: Sync with Urbi. + 2011-01-29 Akim Demaille <demaille(a)gostai.com> build-aux: build-aux/bin. diff --git a/build-aux/bin/move-if-change b/build-aux/bin/move-if-change index 5df5330..985fbb8 100755 --- a/build-aux/bin/move-if-change +++ b/build-aux/bin/move-if-change @@ -1,14 +1,79 @@ #!/bin/sh + # Like mv $1 $2, but if the files are the same, just delete $1. # Status is 0 if $2 is changed, 1 otherwise. -if test -r "$2"; then - if cmp -s "$1" "$2"; then - echo >&2 "$2 is unchanged" - rm -f "$1" - else - mv -f "$1" "$2" - fi +usage () +{ + cat <<EOF +usage: $0 [OPTION...] SOURCE DESTINATION + +Rename SOURCE as DESTINATION, but preserve the timestamps of +DESTINATION if SOURCE and DESTINATION have equal contents. + +Options: + -c, --color display the diffs in color if colordiff is available + -h, --help display this message and exit + -I, --ignore-matching-lines REGEXP + ignore differences in lines matching REGEXP + -s, --silent do not report anything + -v, --verbose display the diffs +EOF + exit 0 +} + +diff=diff +diffflags=-u +verbose=false + +while test $# != 0 +do + case $1 in + (-c|--color) + # The Emacs shell and compilation-mode are really bad at + # displaying colors. + if (colordiff --version) >/dev/null 2>&1 \ + && test -z "$INSIDE_EMACS"; then + diff=colordiff + fi + ;; + + (-h|--help) + usage ;; + + (-I|--ignore-matching-lines) + shift + diffflags="$diffflags -I $1";; + + (-s|--silent) + verbose=false;; + + (-v|--verbose) + verbose=true;; + + (*) + if test -z "$new"; then + new=$1 + else + old=$1 + fi + ;; + esac + shift +done + +if $verbose; then + exec 5>&1 else - mv -f "$1" "$2" + exec 5>/dev/null +fi + +if test -r "$old" && $diff $diffflags "$old" "$new" >&5; then + echo >&5 "$old is unchanged" + # The file might have actually changed, but changes that are + # ignored. In that case, we want the latest contents, but the + # oldest time stamp. Since mv preserves time stamps, just set the + # time stamps of the new one to that of the old one. + touch -r "$old" "$new" fi +mv -f "$new" "$old" -- 1.7.2.5

1 0

nolimips nolimips-0.9-14-gf0ce61e maint: upgrade bison++.
by Akim Demaille 18 Oct '12

18 Oct '12

* build-aux/bin/fuse-switch: New. * build-aux/bin/bison++.in: Upgrade: use fuse-switch (does not make any difference in the case of tc), support more options, support verbosity levels. * src/parse/Makefile.am: Fix the bison++ regeneration. (BISONXXFLAGS, AM_BISONFLAGS): New. (FROM_PARSETIGER_YY): Rename as... (SOURCES_PARSETIGER_YY): this, for clarity. Signed-off-by: Roland Levillain <roland(a)lrde.epita.fr> --- ChangeLog | 13 ++ build-aux/bin/bison++.in | 313 ++++++++++++++++++++++++++++++++++----------- build-aux/bin/fuse-switch | 168 ++++++++++++++++++++++++ src/parse/Makefile.am | 32 +++-- 4 files changed, 442 insertions(+), 84 deletions(-) create mode 100755 build-aux/bin/fuse-switch diff --git a/ChangeLog b/ChangeLog index 540c335..7eaa468 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,16 @@ +2012-02-20 Akim Demaille <demaille(a)gostai.com> + + maint: upgrade bison++. + + * build-aux/bin/fuse-switch: New. + * build-aux/bin/bison++.in: Upgrade: use fuse-switch (does not + make any difference in the case of tc), support more options, + support verbosity levels. + * src/parse/Makefile.am: Fix the bison++ regeneration. + (BISONXXFLAGS, AM_BISONFLAGS): New. + (FROM_PARSETIGER_YY): Rename as... + (SOURCES_PARSETIGER_YY): this, for clarity. + 2012-02-17 Akim Demaille <demaille(a)gostai.com> move-if-change: in colors (no 3d available). diff --git a/build-aux/bin/bison++.in b/build-aux/bin/bison++.in index bb11bca..1659e38 100755 --- a/build-aux/bin/bison++.in +++ b/build-aux/bin/bison++.in @@ -1,34 +1,117 @@ #! /bin/sh - +set -x # Exit status. status=0 # Any tool failure is a failure of the script. set -e -: ${BISON=@BISON@} +: ${BISON='@BISON@'} + +stderr () +{ + local i + for i + do + echo "$i" + done | sed >&2 -e "s/^/$me: /" +} + +verbose () +{ + if "$verbose"; then + stderr "$@" + fi +} + +fatal () +{ + stderr "$@" + exit 1 +} + +usage () +{ + cat <<EOF +usage: bison++ OPTIONS... -- INPUT OUTPUT BISON-OPTIONS -# bison++ INPUT OUTPUT OPTIONS -# ---------------------------- +Options: + -h, --help display this message and exit successfully + --location-dir=DIR where to install position.hh and location.hh. + E.g., "\$(top_srcdir)/include/foo" + --location-prefix=DIR where #include must look for these headers. + E.g., "foo" + --verbose display diffs +EOF + exit 0 +} me=$(basename $0) -move_if_change='@abs_srcdir@/move-if-change' +fuse_switch='@abs_srcdir@/fuse-switch' +move_if_change='@abs_srcdir@/move-if-change --color' +verbose=false + +## ---------------------- ## +## Command line parsing. ## +## ---------------------- ## + +get_options () +{ + while test $# != 0 + do + # Handle --option=value by splitting apart and putting back on argv. + case $1 in + (--*=*) + opt=$(echo "$1" | sed -e 's/=.*//') + val=$(echo "$1" | sed -e 's/[^=]*=//') + shift + set dummy "$opt" "$val" ${1+"$@"}; shift + ;; + esac + + case $1 in + (-h | --help ) usage;; + (--location-dir) shift; location_dir=$1;; + (--location-prefix) shift; location_prefix=$1/;; + (--verbose) verbose=: + move_if_change="$move_if_change --verbose";; + (--) shift; break;; + (*) fatal "invalid argument: $1";; + esac + shift + done + + input=$1 + shift + output=$1 + shift + bisonflags="$@" +} + + +## ------ ## +## Main. ## +## ------ ## + +get_options "$@" -input=$1 input_base=$(basename "$input") -shift -output=$1 +input_dir=$(dirname "$input") + output_base=$(basename "$output") output_base_noext=$(echo "$output_base" | sed -e 's/\.[^.]*//') output_dir=$(dirname "$output") -shift -options="$@" +: ${location_dir=$output_dir} + +# The namespace we are in. +# FIXME: We need $srcdir to be able to compute it. +namespace=parse + if $BISON --xml --version >/dev/null 2>&1; then - options="$options --xml" + bisonflags="$bisonflags --xml" fi - # Alexandre Duret-Lutz also notes that in VPATH-builds $(srcdir) can # be an absolute path depending on how ./configure is called ... # In that case @@ -48,7 +131,7 @@ mkdir $tmp cp $input $tmp cd $tmp set +e -$BISON $options $input_base -o $output_base +$BISON $bisonflags $input_base -o $output_base status=$? set -e @@ -58,71 +141,157 @@ set -e # Fixes in place. fix_bison_output () { - # Fix doxygen tags. - perl -pi -e "s|\Q\\file $base\E\b|\\\\file parse/$base|g;" "$1" + local file="$1" + local base + base=$(basename "$file") + local base_noext + base_noext=$(echo "$file" | sed -e 's/\..*//') + perl -pi -e " +# Fix doxygen tags. +s|\Q\\file $base\E\b|\\\\file $namespace/$base|g; + +# Fix sync lines for composite paths. +s|(^#line.*)$base_noext|\$1$input_dir/$base_noext|g + if '$input_dir' ne '$output_dir'; + +# In case position.hh and location.hh were moved. +s{include \"(position.hh|location.hh)\"} + {include <$location_prefix\$1>}g + if '$location_prefix' ne ''; + +# Kill trailing blanks. +s/[ \t]+\$//; +" "$1" + + # Fuse the switches of the parser. + case $file in + (*.cc) $fuse_switch $file + # diff -uw $file.bak $file || true + ;; + esac +} + +# compile_xml_file XML XSL OUT-EXT +# -------------------------------- +# By transforming XML = FILE.xml with XSL.xsl, create FILE.OUT-EXT if needed. +# "Needed" means FILE.OUT-EXT does not exist, or XML was updated. +compile_xml_file () +{ + local xml="$1" + local xsl="$2.xsl" + local out + out=$(basename "$xml" ".xml").$3 + + # "cmp NON-EXISTENT FILE" does what we want: fail. + if ! cmp -s "$xml" "$(out "$xml")" \ + || test ! -f "$(out "$out")"; then + local compile="xsltproc $($BISON --print-datadir)/xslt/$xsl" + if ! $compile "$xml" >"$(tmp "$out")"; then + stderr "cannot convert $xml report to $out" + # Produce a stub for the HTML for sake of the Makefile. + cat >"$(tmp "$out")" <<EOF +<?xml version="1.0" encoding="utf-8"?> +<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" + "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> + +<html> + <head> + <title>Cannot run xsltproc</title> + </head> + <body> + <p>Cannot run xsltproc</p> + </body> +</html> +EOF + fi + install "$out" + fi +} + +# out FILE +# -------- +# Return path name of FILE once installed in its destination directory. +out () +{ + local f + f=$(basename "$1") + case $f in + (position.hh|location.hh) echo "$location_dir/$f";; + (*) echo "$output_dir/$f";; + esac +} + +# out FILE +# -------- +# Return path name of FILE in the tmp directory. +tmp () +{ + echo "$tmp/$(basename "$1")" +} +# install FILE +# ------------ +# Install FILE in its destination directory. +install () +{ + local dest + dest=$(out "$1") + local dir + dir=$(dirname "$dest") + mkdir -p "$dir" || + fatal "cannot create $dir" + $move_if_change "$(tmp "$1")" "$dest" } # Go back to where we were and use relative paths instead of using # absolute file names. The messages look nicer. cd .. -case $status in - 0) - for file in $tmp/* - do - base=$(basename $file) - base_noext=$(echo "$base" | sed -e 's/\.[^.]*//') - out=$output_dir/$base - case $base in - $input_base) - # Leave it here. - ;; - - *.xml) - # Computing the HTML is slow. Do it when the XML changed. - fix_bison_output "$file" - if ! test -r "$out" || ! cmp -s "$file" "$out"; then - xml2html="xsltproc $($BISON --print-datadir)/xslt/xml2xhtml.xsl" - if $xml2html "$file" >$tmp/$base_noext.html; then - $move_if_change "$tmp/$base_noext.html" \ - "$output_dir/$base_noext.html" - else - echo >&2 "$0: cannot convert XML report to HTML" - rm $tmp/$base_noext.html - fi - fi - $move_if_change "$file" "$out" - ;; - - *.hh) - fix_bison_output "$file" - # To save cycles, if the file differs only on sync lines, - # update it (to be right), but keep the original timestamps. - if test -r "$out" && - diff -I '^#line' -I '/\* Line .* of .* \*/' -q "$file" "$out"; then - touch -r "$out" "$file" - cp "$out" "$out.bak" - echo >&2 "$0: kept the stamps of $file" - fi - $move_if_change "$file" "$out" - ;; - - *) - fix_bison_output "$file" - $move_if_change "$file" "$out" - ;; - esac - done - ;; - - *) # We really want to keep the *.output files. - for file in $(ls $tmp/*.output $tmp/*.xml $tmp/*.html 2>/dev/null) - do - $move_if_change "$file" "$output_dir/$(basename $file)" - done - ;; -esac +for file in $tmp/* +do + base=$(basename $file) + base_noext=$(echo "$base" | sed -e 's/\.[^.]*//') + case $status:$base in + (*:$input_base) + # Leave it here. + ;; + + # Success or not, install it. + (*:*.xml) + # Computing the HTML is slow. Do it when the XML changed. + fix_bison_output "$file" + compile_xml_file "$file" "xml2xhtml" "html" + # Compiling the dot output is quite long, it would be better + # to do that from the Makefile, so that -j applies. + # compile_xml_file "$file" "xml2dot" "dot" + install "$file" + ;; + + (0:*.hh) + fix_bison_output "$file" + # To save cycles, if the file differs only on sync lines, + # update it (to be right), but keep the original timestamps. + if test -r "$(out "$file")" && + diff -I '^#line' -I '/\* Line .* of .* \*/' -q \ + "$file" "$(out "$file")" + then + touch -r "$(out "$file")" "$file" + cp "$(out "$file")" "$(out "$file").bak" + verbose "kept the stamps of $file" + fi + install "$file" + ;; + + (*:*.output) + install "$file" + ;; + + (0:*) + fix_bison_output "$file" + install "$file" + ;; + esac +done # Get rid of the tmp dir. -rm -rf $tmp +# rm -rf $tmp exit $status diff --git a/build-aux/bin/fuse-switch b/build-aux/bin/fuse-switch new file mode 100755 index 0000000..0d48d41 --- /dev/null +++ b/build-aux/bin/fuse-switch @@ -0,0 +1,168 @@ +#! /usr/bin/perl -w + +# This script *tries* to fuse consecutive "switches" that have the +# same body. +# +# Usage: $0 FILES +# +# Leaves a copy of the input files as FILE.bak. + + +use strict; + +my $case_re = '^\s*(case\b.*|default)\s*:'; + +# Return the block of code with all the ignored parts removed. +sub code ($) +{ + local ($_) = @_; +# print STDERR "CODE IN: $_"; + s,//.*,,gm; + s,/\*.*?.*\*/,,gm; + s/#line .*//gm; +# print STDERR "CODE OUT: $_"; + return $_; +} + +# Compare two case blocks against equality, ignoring the case label. +sub case_eq($$) +{ + my ($b1, $b2) = @_; + return case_body(code($b1)) eq case_body(code($b2)); +} + +# Return the line which contains the "case" this block of code. +sub case_label($) +{ + my ($case) = @_; + my $res = ''; + for my $line (split "\n", $case) + { + # We put no space at the end of '//-' not to introduce trailing + # spaces. + $res .= ($line !~ /$case_re/ && '//-') . $line . "\n" + } + return $res; +} + +# Return the case-block without its case line. +sub case_body($) +{ + local ($_) = @_; +# print STDERR "BODY IN: $_"; + s/^.*$case_re.*\n//mg; +# print STDERR "BODY OUT: $_"; + return $_; +} + + +sub fuse($$) +{ + my ($input, $output) = @_; + use IO::File; + + my $in = new IO::File($input) or die; + my $out = new IO::File(">$output") or die; + + # Something before the next $case. + my $pre_case = ''; + # The body of the case: from case/default to the next break; + # There must be no break inside. + my $case = ''; + my $previous_case = ''; + + # Whether we are in the switch {}. + my $in_switch = 0; + + while ($_ = $in->getline) + { +# print STDERR "\$_ = $_"; + if (!$in_switch) + { + if (/^\s*switch\b/) + { + $in_switch = 1; + } + } + else + { + # in switch. + # + # The "default: break" one a single line is output by + # bison's lalr1.cc.. + if (m/$case_re/ .. m/^\s*(?:default:\s*)?break/) + { + # Register the current case. + $case .= $_; + if (/break/) + { + if (case_eq($previous_case, $case)) + { +# print STDERR "== {{$previous_case}} {{$case}}\n"; + $_ = case_label ($previous_case); + } + else + { + # The previous case is needed. +# print STDERR "!= {{$previous_case}} {{$case}}\n"; + $_ = $previous_case; + } + $previous_case = $case; + $case = ""; + $_ .= $pre_case; + $pre_case = ''; + } + else + { + # Print nothing. + $_ = ""; + } + } + elsif (m/}/) + { + # The closing brace of the switch. + $_ = $previous_case . $pre_case . $_; + $pre_case = ''; + $previous_case = ''; + $in_switch = 0; + } + else + { + # Something in a switch, but not in a case. Keep it, + # and output it before the forth coming output. Don't + # put it in $case though, as it would be commented out, + # which might be wrong (e.g., pragmas, or cpp + # directives). + $pre_case .= $_; + $_ = ''; + } + } + print $out $_; + } + die "could not insert $pre_case" + if $pre_case; +} + +use File::Copy; +for my $file (@ARGV) +{ + copy ($file, "$file.bak") or die; + fuse("$file.bak", "$file"); +} + +### Setup "GNU" style for perl-mode and cperl-mode. +## Local Variables: +## perl-indent-level: 2 +## perl-continued-statement-offset: 2 +## perl-continued-brace-offset: 0 +## perl-brace-offset: 0 +## perl-brace-imaginary-offset: 0 +## perl-label-offset: -2 +## cperl-indent-level: 2 +## cperl-brace-offset: 0 +## cperl-continued-brace-offset: 0 +## cperl-label-offset: -2 +## cperl-extra-newline-before-brace: t +## cperl-merge-trailing-else: nil +## cperl-continued-statement-offset: 2 +## End: diff --git a/src/parse/Makefile.am b/src/parse/Makefile.am index 7b50a34..f19a240 100644 --- a/src/parse/Makefile.am +++ b/src/parse/Makefile.am @@ -1,15 +1,15 @@ # From LRDE's TC's src/parse/Makefile.am: -# "[asm-parse.cc] is not part of [FROM_ASM_PARSE_YY] to prevent +# "[asm-parse.cc] is not part of [SOURCES_ASM_PARSE_YY] to prevent # [asm-parse.cc] from occuring twice in libparse_a_SOURCES to avoid # double inclusion of [asm-parse.o]." -FROM_ASM_PARSE_YY = \ +SOURCES_ASM_PARSE_YY = \ $(srcdir)/stack.hh $(srcdir)/position.hh $(srcdir)/location.hh \ $(srcdir)/asm-parse.hh BUILT_SOURCES = \ asm-scan.ll asm-scan.ll.stamp \ asm-parse.yy asm-parse.yy.stamp \ - $(FROM_ASM_PARSE_YY) + $(SOURCES_ASM_PARSE_YY) # This code comes from "Handling Tools that Produce Many Outputs", # from the Automake documentation. @@ -34,25 +34,33 @@ $(srcdir)/asm-parse.yy: asm-parse.yy.stamp BISONXX = $(top_builddir)/build-aux/bin/bison++ BISONXX_IN = $(top_srcdir)/build-aux/bin/bison++.in $(BISONXX): $(BISONXX_IN) - cd $(top_builddir)/build-aux && $(MAKE) $(AM_MAKEFLAGS) bin/bison++ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) build-aux/bin/bison++ + +BISONXXFLAGS = \ + --verbose +AM_BISONFLAGS = \ + --report=all EXTRA_DIST += $(srcdir)/bison++.stamp $(srcdir)/asm-parse.yy $(srcdir)/bison++.stamp: $(srcdir)/asm-parse.yy $(BISONXX_IN) - $(MAKE) $(AM_MAKEFLAGS) $(BISONXX) - @rm -rf bison++.stamp.tmp - @touch bison++.stamp.tmp - $(BISONXX) $(srcdir)/asm-parse.yy $(srcdir)/asm-parse.cc -d -ra - @mv -f bison++.stamp.tmp $@ + mkdir -p $(@D) + rm -f $@ $@.tmp + echo '$@ rebuilt because of: $?' >$@.tmp + $(MAKE) $(BISONXX) + $(BISONXX) $(BISONXXFLAGS) -- \ + $< $(srcdir)/asm-parse.cc \ + $(AM_BISONFLAGS) $(BISONFLAGS) + mv -f $@.tmp $@ # Run bison if a file that can be created by it is missing: -$(srcdir)/asm-parse.cc $(FROM_ASM_PARSE_YY): $(srcdir)/bison++.stamp +$(srcdir)/asm-parse.cc $(SOURCES_ASM_PARSE_YY): $(srcdir)/bison++.stamp @if test ! -f $@; then \ rm -f $(srcdir)/bison++.stamp; \ $(MAKE) $(AM_MAKEFLAGS) $(srcdir)/bison++.stamp; \ fi -MAINTAINERCLEANFILES = asm-scan.ll asm-scan.yy $(FROM_ASM_PARSE_YY) +MAINTAINERCLEANFILES = asm-scan.ll asm-scan.yy $(SOURCES_ASM_PARSE_YY) noinst_LTLIBRARIES = libparse.la @@ -60,6 +68,6 @@ libparse_la_CPPFLAGS = -I $(top_srcdir)/src -I $(top_builddir)/src libparse_la_SOURCES = \ fwd.hh \ asm-parse.cc asm-parse.yy.stamp \ - $(FROM_ASM_PARSE_YY) \ + $(SOURCES_ASM_PARSE_YY) \ asm-scan.ll asm-scan.hh asm-scan.ll.stamp \ libparse.hh libparse.cc -- 1.7.2.5

1 0

nolimips nolimips-0.9-15-gacc59f3 build-aux/bin/bison++.in: Remove `set -x'.
by Roland Levillain 18 Oct '12

18 Oct '12

Signed-off-by: Roland Levillain <roland(a)lrde.epita.fr> --- ChangeLog | 4 ++++ build-aux/bin/bison++.in | 2 +- 2 files changed, 5 insertions(+), 1 deletions(-) diff --git a/ChangeLog b/ChangeLog index 7eaa468..7847804 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,7 @@ +2012-02-20 Roland Levillain <roland(a)lrde.epita.fr> + + * build-aux/bin/bison++.in: Remove `set -x'. + 2012-02-20 Akim Demaille <demaille(a)gostai.com> maint: upgrade bison++. diff --git a/build-aux/bin/bison++.in b/build-aux/bin/bison++.in index 1659e38..a22c7d2 100755 --- a/build-aux/bin/bison++.in +++ b/build-aux/bin/bison++.in @@ -1,5 +1,5 @@ #! /bin/sh -set -x + # Exit status. status=0 -- 1.7.2.5

1 0

nolimips nolimips-0.9-16-gcef5645 Distribute build-aux/bin/fuse-switch.
by Roland Levillain 18 Oct '12

18 Oct '12

* build-aux/Makefile.am (dist_noinst_SCRIPTS): Add build-aux/bin/fuse-switch. Signed-off-by: Roland Levillain <roland(a)lrde.epita.fr> --- ChangeLog | 7 +++++++ build-aux/Makefile.am | 2 +- 2 files changed, 8 insertions(+), 1 deletions(-) diff --git a/ChangeLog b/ChangeLog index 7847804..cd95139 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,10 @@ +2012-02-22 Roland Levillain <roland(a)lrde.epita.fr> + + Distribute build-aux/bin/fuse-switch. + + * build-aux/Makefile.am (dist_noinst_SCRIPTS): + Add build-aux/bin/fuse-switch. + 2012-02-20 Roland Levillain <roland(a)lrde.epita.fr> * build-aux/bin/bison++.in: Remove `set -x'. diff --git a/build-aux/Makefile.am b/build-aux/Makefile.am index 966bf78..6348a4b 100644 --- a/build-aux/Makefile.am +++ b/build-aux/Makefile.am @@ -1,7 +1,7 @@ ## Makefile.am -- Process this file with automake to produce Makefile.in ## -dist_noinst_SCRIPTS = bin/move-if-change +dist_noinst_SCRIPTS = bin/move-if-change bin/fuse-switch nodist_noinst_SCRIPTS = bin/bison++ EXTRA_DIST = $(SPECIFIC_MACROS) $(STANDARD_MACROS) $(SPECIFIC_TOOLS) -- 1.7.2.5

1 0

nolimips branch update-build-aux created: nolimips-0.9-17-gff5ce5b
by git＠lrde.epita.fr 18 Oct '12

18 Oct '12

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Nolimips, a MIPS simulator with infinitely many registers". The branch update-build-aux has been created at ff5ce5b15532948717df99e4c3e2872bf8acb552 (commit) - Log ----------------------------------------------------------------- ff5ce5b build-aux: update tools cef5645 Distribute build-aux/bin/fuse-switch. acc59f3 build-aux/bin/bison++.in: Remove `set -x'. f0ce61e maint: upgrade bison++. a3d879c move-if-change: in colors (no 3d available). fb32fd0 build-aux: build-aux/bin. 89bbed9 Formatting changes ----------------------------------------------------------------------- hooks/post-receive -- Nolimips, a MIPS simulator with infinitely many registers

1 0

nolimips branch master updated: nolimips-0.9-10-gfb8a6d4
by git＠lrde.epita.fr 18 Oct '12

18 Oct '12

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Nolimips, a MIPS simulator with infinitely many registers". The branch master has been updated via fb8a6d4adfd97265f6c298851a50ef0d6a78a771 (commit) via f084c326c810013540100ca5dcd9982e128bdbb4 (commit) from 0703bb7c2526372c01f09e92709c768a961a51b6 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- fb8a6d4 .gitignore: Ignore more files. f084c32 Fix the generation of the parser. ----------------------------------------------------------------------- Summary of changes: .gitignore | 2 ++ ChangeLog | 7 +++++++ src/parse/asm-parse.yy.gen.py | 3 ++- 3 files changed, 11 insertions(+), 1 deletions(-) hooks/post-receive -- Nolimips, a MIPS simulator with infinitely many registers

1 0

nolimips nolimips-0.9-10-gfb8a6d4 .gitignore: Ignore more files.
by Roland Levillain 18 Oct '12

18 Oct '12

--- .gitignore | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/.gitignore b/.gitignore index 9647d5b..d161dd0 100644 --- a/.gitignore +++ b/.gitignore @@ -1,9 +1,11 @@ Makefile.in Makefile +.DS_Store .deps *.pyc *.stamp *~ +*.bak /_build* /aclocal.m4 -- 1.7.2.5

1 0