September 2013 - Projects

[Olena] #205: Repair the TracNav bar
by Olena Trac 14 May '14

14 May '14

#205: Repair the TracNav bar ------------------------+--------------------------------------------------- Reporter: levill_r | Owner: Olena Team Type: defect | Status: new Priority: minor | Milestone: Component: Trac | Version: 1.0 Keywords: system web | ------------------------+--------------------------------------------------- Since the update of Trac, many Wiki pages using the !TracNav plug-in won't display the !TracNav bar (menu on the right of some pages), and show this error instead : {{{ Error: Failed to load processor TracNav No macro or processor named 'TracNav' found }}} The curious thing is, the !TracNav bar is working ''sometimes''!! To see this in action, try reloading a page several times (e.g. CodingStyle): sometimes you'll see the bar, other times you'll get the error. I assume other Tracs ([https://trac.lrde.org/vaucanson/ Vaucanson's], [https://trac.lrde.org/transformers/ Transfomers'], etc.) face the same problem; we should discuss this issue with their maintainers. Therefore I (Roland) am cc'ing this ticket to the `projects` mailing list as well. -- Ticket URL: <https://trac.lrde.org/olena/ticket/205> Olena <http://olena.lrde.epita.fr> Olena, a generic and efficient C++ image processing library.

1 1

nolimips: branch master updated: nolimips-0.9-25-gfd02bdd
by git＠lrde.epita.fr 23 Sep '13

23 Sep '13

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Nolimips, a MIPS simulator with infinitely many registers". The branch master has been updated via fd02bdda9547f7e7b259d24354c14e5d39d02366 (commit) from f15a43aeb84aad4d2704449817871ad4631be3da (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- fd02bdd Update configure.ac. ----------------------------------------------------------------------- Summary of changes: configure.ac | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) hooks/post-receive -- Nolimips, a MIPS simulator with infinitely many registers

1 0

nolimips: nolimips-0.9-25-gfd02bdd Update configure.ac.
by Roland Levillain 23 Sep '13

23 Sep '13

* configure.ac: s/AC_PROG_LIBTOOL/LT_INIT/. --- configure.ac | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configure.ac b/configure.ac index 96833cf..1e3f366 100644 --- a/configure.ac +++ b/configure.ac @@ -27,7 +27,7 @@ AC_LANG([C++]) AC_PROG_CXX # Enable Libtool. -AC_PROG_LIBTOOL +LT_INIT # Look for readline library. AC_CHECK_READLINE -- 1.7.10.4

1 0

nolimips: branch master updated: nolimips-0.9-24-gf15a43a
by git＠lrde.epita.fr 23 Sep '13

23 Sep '13

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Nolimips, a MIPS simulator with infinitely many registers". The branch master has been updated via f15a43aeb84aad4d2704449817871ad4631be3da (commit) via f47d3c5c2a59103c69acccaa2ad1926efb8a73cb (commit) from 9fcaec4d377fa668308c91043f2bfaf621788e8a (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- f15a43a Add a rule to update ChangeLog using Git commit messages. f47d3c5 Require Automake 1.11 instead of 1.12, as Debian 7 ships the former only. ----------------------------------------------------------------------- Summary of changes: .last-cl-gen | 1 + Makefile.am | 21 ++ build-aux/Makefile.am | 3 +- build-aux/gitlog-to-changelog | 432 +++++++++++++++++++++++++++++++++++++++++ configure.ac | 2 +- gnulib.modules | 3 +- 6 files changed, 459 insertions(+), 3 deletions(-) create mode 100644 .last-cl-gen create mode 100755 build-aux/gitlog-to-changelog hooks/post-receive -- Nolimips, a MIPS simulator with infinitely many registers

1 0

havm: branch master updated: havm-0.25-7-g41c602c
by git＠lrde.epita.fr 23 Sep '13

23 Sep '13

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "HAVM, a Tree intermediate language interpreter". The branch master has been updated via 41c602c0e0f26580127fc6ab08e1ac7131b3baa1 (commit) from 9575357c6269b0c7860f19fe2eeaf343c71e4b94 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- 41c602c Add a rule to update ChangeLog using Git commit messages. ----------------------------------------------------------------------- Summary of changes: .last-cl-gen | 1 + Makefile.am | 21 ++ build-aux/gitlog-to-changelog | 432 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 454 insertions(+) create mode 100644 .last-cl-gen create mode 100755 build-aux/gitlog-to-changelog hooks/post-receive -- HAVM, a Tree intermediate language interpreter

1 0

havm: havm-0.25-7-g41c602c Add a rule to update ChangeLog using Git commit messages.
by Roland Levillain 23 Sep '13

23 Sep '13

* build-aux/gitlog-to-changelog: New. Imported from Git Gnulib. * .last-cl-gen: New. * Makefile.am (update-ChangeLog): New target. (EXTRA_DIST): Add build-aux/gitlog-to-changelog and .last-cl-gen. --- .last-cl-gen | 1 + Makefile.am | 21 ++ build-aux/gitlog-to-changelog | 432 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 454 insertions(+) create mode 100644 .last-cl-gen create mode 100755 build-aux/gitlog-to-changelog diff --git a/.last-cl-gen b/.last-cl-gen new file mode 100644 index 0000000..429a509 --- /dev/null +++ b/.last-cl-gen @@ -0,0 +1 @@ +9575357c6269b0c7860f19fe2eeaf343c71e4b94 diff --git a/Makefile.am b/Makefile.am index b50ab73..2d86cdb 100644 --- a/Makefile.am +++ b/Makefile.am @@ -29,3 +29,24 @@ deb: install-doc-remote: cd doc && $(MAKE) $(AM_MAKEFLAGS) $@ + +## ------------------------ ## +## ChangeLog regeneration. ## +## ------------------------ ## + +.PHONY: update-ChangeLog +update-ChangeLog: + $(AM_V_GEN)if test -d $(srcdir)/.git; then \ + $(srcdir)/build-aux/gitlog-to-changelog \ + --format='%s%n%n%b%n' --no-cluster \ + --strip-tab --strip-cherry-pick \ + -- $$(cat $(srcdir)/.last-cl-gen).. \ + >ChangeLog.tmp \ + && git rev-list -n 1 HEAD >.last-cl-gen.tmp \ + && (echo; cat $(srcdir)/ChangeLog) >>ChangeLog.tmp \ + && mv -f ChangeLog.tmp $(srcdir)/ChangeLog \ + && mv -f .last-cl-gen.tmp $(srcdir)/.last-cl-gen \ + && rm -f ChangeLog.tmp; \ + fi + +EXTRA_DIST = build-aux/gitlog-to-changelog .last-cl-gen diff --git a/build-aux/gitlog-to-changelog b/build-aux/gitlog-to-changelog new file mode 100755 index 0000000..e02d34c --- /dev/null +++ b/build-aux/gitlog-to-changelog @@ -0,0 +1,432 @@ +eval '(exit $?0)' && eval 'exec perl -wS "$0" ${1+"$@"}' + & eval 'exec perl -wS "$0" $argv:q' + if 0; +# Convert git log output to ChangeLog format. + +my $VERSION = '2012-07-29 06:11'; # UTC +# The definition above must lie within the first 8 lines in order +# for the Emacs time-stamp write hook (at end) to update it. +# If you change this file with Emacs, please let the write hook +# do its job. Otherwise, update this string manually. + +# Copyright (C) 2008-2013 Free Software Foundation, Inc. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Written by Jim Meyering + +use strict; +use warnings; +use Getopt::Long; +use POSIX qw(strftime); + +(my $ME = $0) =~ s|.*/||; + +# use File::Coda; # http://meyering.net/code/Coda/ +END { + defined fileno STDOUT or return; + close STDOUT and return; + warn "$ME: failed to close standard output: $!\n"; + $? ||= 1; +} + +sub usage ($) +{ + my ($exit_code) = @_; + my $STREAM = ($exit_code == 0 ? *STDOUT : *STDERR); + if ($exit_code != 0) + { + print $STREAM "Try '$ME --help' for more information.\n"; + } + else + { + print $STREAM <<EOF; +Usage: $ME [OPTIONS] [ARGS] + +Convert git log output to ChangeLog format. If present, any ARGS +are passed to "git log". To avoid ARGS being parsed as options to +$ME, they may be preceded by '--'. + +OPTIONS: + + --amend=FILE FILE maps from an SHA1 to perl code (i.e., s/old/new/) that + makes a change to SHA1's commit log text or metadata. + --append-dot append a dot to the first line of each commit message if + there is no other punctuation or blank at the end. + --no-cluster never cluster commit messages under the same date/author + header; the default is to cluster adjacent commit messages + if their headers are the same and neither commit message + contains multiple paragraphs. + --srcdir=DIR the root of the source tree, from which the .git/ + directory can be derived. + --since=DATE convert only the logs since DATE; + the default is to convert all log entries. + --format=FMT set format string for commit subject and body; + see 'man git-log' for the list of format metacharacters; + the default is '%s%n%b%n' + --strip-tab remove one additional leading TAB from commit message lines. + --strip-cherry-pick remove data inserted by "git cherry-pick"; + this includes the "cherry picked from commit ..." line, + and the possible final "Conflicts:" paragraph. + --help display this help and exit + --version output version information and exit + +EXAMPLE: + + $ME --since=2008-01-01 > ChangeLog + $ME -- -n 5 foo > last-5-commits-to-branch-foo + +SPECIAL SYNTAX: + +The following types of strings are interpreted specially when they appear +at the beginning of a log message line. They are not copied to the output. + + Copyright-paperwork-exempt: Yes + Append the "(tiny change)" notation to the usual "date name email" + ChangeLog header to mark a change that does not require a copyright + assignment. + Co-authored-by: Joe User <user\(a)example.com> + List the specified name and email address on a second + ChangeLog header, denoting a co-author. + Signed-off-by: Joe User <user\(a)example.com> + These lines are simply elided. + +In a FILE specified via --amend, comment lines (starting with "#") are ignored. +FILE must consist of <SHA,CODE+> pairs where SHA is a 40-byte SHA1 (alone on +a line) referring to a commit in the current project, and CODE refers to one +or more consecutive lines of Perl code. Pairs must be separated by one or +more blank line. + +Here is sample input for use with --amend=FILE, from coreutils: + +3a169f4c5d9159283548178668d2fae6fced3030 +# fix typo in title: +s/all tile types/all file types/ + +1379ed974f1fa39b12e2ffab18b3f7a607082202 +# Due to a bug in vc-dwim, I mis-attributed a patch by Paul to myself. +# Change the author to be Paul. Note the escaped "@": +s,Jim .*>,Paul Eggert <eggert\\\(a)cs.ucla.edu>, + +EOF + } + exit $exit_code; +} + +# If the string $S is a well-behaved file name, simply return it. +# If it contains white space, quotes, etc., quote it, and return the new string. +sub shell_quote($) +{ + my ($s) = @_; + if ($s =~ m![^\w+/.,-]!) + { + # Convert each single quote to '\'' + $s =~ s/\'/\'\\\'\'/g; + # Then single quote the string. + $s = "'$s'"; + } + return $s; +} + +sub quoted_cmd(@) +{ + return join (' ', map {shell_quote $_} @_); +} + +# Parse file F. +# Comment lines (starting with "#") are ignored. +# F must consist of <SHA,CODE+> pairs where SHA is a 40-byte SHA1 +# (alone on a line) referring to a commit in the current project, and +# CODE refers to one or more consecutive lines of Perl code. +# Pairs must be separated by one or more blank line. +sub parse_amend_file($) +{ + my ($f) = @_; + + open F, '<', $f + or die "$ME: $f: failed to open for reading: $!\n"; + + my $fail; + my $h = {}; + my $in_code = 0; + my $sha; + while (defined (my $line = <F>)) + { + $line =~ /^\#/ + and next; + chomp $line; + $line eq '' + and $in_code = 0, next; + + if (!$in_code) + { + $line =~ /^([0-9a-fA-F]{40})$/ + or (warn "$ME: $f:$.: invalid line; expected an SHA1\n"), + $fail = 1, next; + $sha = lc $1; + $in_code = 1; + exists $h->{$sha} + and (warn "$ME: $f:$.: duplicate SHA1\n"), + $fail = 1, next; + } + else + { + $h->{$sha} ||= ''; + $h->{$sha} .= "$line\n"; + } + } + close F; + + $fail + and exit 1; + + return $h; +} + +# git_dir_option $SRCDIR +# +# From $SRCDIR, the --git-dir option to pass to git (none if $SRCDIR +# is undef). Return as a list (0 or 1 element). +sub git_dir_option($) +{ + my ($srcdir) = @_; + my @res = (); + if (defined $srcdir) + { + my $qdir = shell_quote $srcdir; + my $cmd = "cd $qdir && git rev-parse --show-toplevel"; + my $qcmd = shell_quote $cmd; + my $git_dir = qx($cmd); + defined $git_dir + or die "$ME: cannot run $qcmd: $!\n"; + $? == 0 + or die "$ME: $qcmd had unexpected exit code or signal ($?)\n"; + chomp $git_dir; + push @res, "--git-dir=$git_dir/.git"; + } + @res; +} + +{ + my $since_date; + my $format_string = '%s%n%b%n'; + my $amend_file; + my $append_dot = 0; + my $cluster = 1; + my $strip_tab = 0; + my $strip_cherry_pick = 0; + my $srcdir; + GetOptions + ( + help => sub { usage 0 }, + version => sub { print "$ME version $VERSION\n"; exit }, + 'since=s' => \$since_date, + 'format=s' => \$format_string, + 'amend=s' => \$amend_file, + 'append-dot' => \$append_dot, + 'cluster!' => \$cluster, + 'strip-tab' => \$strip_tab, + 'strip-cherry-pick' => \$strip_cherry_pick, + 'srcdir=s' => \$srcdir, + ) or usage 1; + + defined $since_date + and unshift @ARGV, "--since=$since_date"; + + # This is a hash that maps an SHA1 to perl code (i.e., s/old/new/) + # that makes a correction in the log or attribution of that commit. + my $amend_code = defined $amend_file ? parse_amend_file $amend_file : {}; + + my @cmd = ('git', + git_dir_option $srcdir, + qw(log --log-size), + '--pretty=format:%H:%ct %an <%ae>%n%n'.$format_string, @ARGV); + open PIPE, '-|', @cmd + or die ("$ME: failed to run '". quoted_cmd (@cmd) ."': $!\n" + . "(Is your Git too old? Version 1.5.1 or later is required.)\n"); + + my $prev_multi_paragraph; + my $prev_date_line = ''; + my @prev_coauthors = (); + while (1) + { + defined (my $in = <PIPE>) + or last; + $in =~ /^log size (\d+)$/ + or die "$ME:$.: Invalid line (expected log size):\n$in"; + my $log_nbytes = $1; + + my $log; + my $n_read = read PIPE, $log, $log_nbytes; + $n_read == $log_nbytes + or die "$ME:$.: unexpected EOF\n"; + + # Extract leading hash. + my ($sha, $rest) = split ':', $log, 2; + defined $sha + or die "$ME:$.: malformed log entry\n"; + $sha =~ /^[0-9a-fA-F]{40}$/ + or die "$ME:$.: invalid SHA1: $sha\n"; + + # If this commit's log requires any transformation, do it now. + my $code = $amend_code->{$sha}; + if (defined $code) + { + eval 'use Safe'; + my $s = new Safe; + # Put the unpreprocessed entry into "$_". + $_ = $rest; + + # Let $code operate on it, safely. + my $r = $s->reval("$code") + or die "$ME:$.:$sha: failed to eval \"$code\":\n$@\n"; + + # Note that we've used this entry. + delete $amend_code->{$sha}; + + # Update $rest upon success. + $rest = $_; + } + + # Remove lines inserted by "git cherry-pick". + if ($strip_cherry_pick) + { + $rest =~ s/^\s*Conflicts:\n.*//sm; + $rest =~ s/^\s*$cherry picked from commit [\da-f]+$\n//m; + } + + my @line = split "\n", $rest; + my $author_line = shift @line; + defined $author_line + or die "$ME:$.: unexpected EOF\n"; + $author_line =~ /^(\d+) (.*>)$/ + or die "$ME:$.: Invalid line " + . "(expected date/author/email):\n$author_line\n"; + + # Format 'Copyright-paperwork-exempt: Yes' as a standard ChangeLog + # `(tiny change)' annotation. + my $tiny = (grep (/^Copyright-paperwork-exempt:\s+[Yy]es$/, @line) + ? ' (tiny change)' : ''); + + my $date_line = sprintf "%s %s$tiny\n", + strftime ("%F", localtime ($1)), $2; + + my @coauthors = grep /^Co-authored-by:.*$/, @line; + # Omit meta-data lines we've already interpreted. + @line = grep !/^(?:Signed-off-by:[ ].*>$ + |Co-authored-by:[ ] + |Copyright-paperwork-exempt:[ ] + )/x, @line; + + # Remove leading and trailing blank lines. + if (@line) + { + while ($line[0] =~ /^\s*$/) { shift @line; } + while ($line[$#line] =~ /^\s*$/) { pop @line; } + } + + # Record whether there are two or more paragraphs. + my $multi_paragraph = grep /^\s*$/, @line; + + # Format 'Co-authored-by: A U Thor <email(a)example.com>' lines in + # standard multi-author ChangeLog format. + for (@coauthors) + { + s/^Co-authored-by:\s*/\t /; + s/\s*</ </; + + /<.*?@.*\..*>/ + or warn "$ME: warning: missing email address for " + . substr ($_, 5) . "\n"; + } + + # If clustering of commit messages has been disabled, if this header + # would be different from the previous date/name/email/coauthors header, + # or if this or the previous entry consists of two or more paragraphs, + # then print the header. + if ( ! $cluster + || $date_line ne $prev_date_line + || "@coauthors" ne "@prev_coauthors" + || $multi_paragraph + || $prev_multi_paragraph) + { + $prev_date_line eq '' + or print "\n"; + print $date_line; + @coauthors + and print join ("\n", @coauthors), "\n"; + } + $prev_date_line = $date_line; + @prev_coauthors = @coauthors; + $prev_multi_paragraph = $multi_paragraph; + + # If there were any lines + if (@line == 0) + { + warn "$ME: warning: empty commit message:\n $date_line\n"; + } + else + { + if ($append_dot) + { + # If the first line of the message has enough room, then + if (length $line[0] < 72) + { + # append a dot if there is no other punctuation or blank + # at the end. + $line[0] =~ /[[:punct:]\s]$/ + or $line[0] .= '.'; + } + } + + # Remove one additional leading TAB from each line. + $strip_tab + and map { s/^\t// } @line; + + # Prefix each non-empty line with a TAB. + @line = map { length $_ ? "\t$_" : '' } @line; + + print "\n", join ("\n", @line), "\n"; + } + + defined ($in = <PIPE>) + or last; + $in ne "\n" + and die "$ME:$.: unexpected line:\n$in"; + } + + close PIPE + or die "$ME: error closing pipe from " . quoted_cmd (@cmd) . "\n"; + # FIXME-someday: include $PROCESS_STATUS in the diagnostic + + # Complain about any unused entry in the --amend=F specified file. + my $fail = 0; + foreach my $sha (keys %$amend_code) + { + warn "$ME:$amend_file: unused entry: $sha\n"; + $fail = 1; + } + + exit $fail; +} + +# Local Variables: +# mode: perl +# indent-tabs-mode: nil +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "my $VERSION = '" +# time-stamp-format: "%:y-%02m-%02d %02H:%02M" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "'; # UTC" +# End: -- 1.7.10.4

1 0

nolimips: nolimips-0.9-24-gf15a43a Add a rule to update ChangeLog using Git commit messages.
by Roland Levillain 23 Sep '13

23 Sep '13

* gnulib.modules: Add gitlog-to-changelog. * build-aux/gitlog-to-changelog: New. Installed by bootstrap from Gnulib's repository. * build-aux/Makefile.am (SPECIFIC_TOOLS): Add dev/gitlog-to-changelog. * .last-cl-gen: New. * Makefile.am (update-ChangeLog): New target. (EXTRA_DIST): Add .last-cl-gen. --- .last-cl-gen | 1 + Makefile.am | 21 ++ build-aux/Makefile.am | 3 +- build-aux/gitlog-to-changelog | 432 +++++++++++++++++++++++++++++++++++++++++ gnulib.modules | 3 +- 5 files changed, 458 insertions(+), 2 deletions(-) create mode 100644 .last-cl-gen create mode 100755 build-aux/gitlog-to-changelog diff --git a/.last-cl-gen b/.last-cl-gen new file mode 100644 index 0000000..865262b --- /dev/null +++ b/.last-cl-gen @@ -0,0 +1 @@ +81bf8323f62695c773a7055017d36c9b584feb47 diff --git a/Makefile.am b/Makefile.am index 3916f91..894b5ba 100644 --- a/Makefile.am +++ b/Makefile.am @@ -10,3 +10,24 @@ EXTRA_DIST = \ install-doc-remote: cd doc && $(MAKE) $(AM_MAKEFLAGS) $@ + +## ------------------------ ## +## ChangeLog regeneration. ## +## ------------------------ ## + +.PHONY: update-ChangeLog +update-ChangeLog: + $(AM_V_GEN)if test -d $(srcdir)/.git; then \ + $(srcdir)/build-aux/gitlog-to-changelog \ + --format='%s%n%n%b%n' --no-cluster \ + --strip-tab --strip-cherry-pick \ + -- $$(cat $(srcdir)/.last-cl-gen).. \ + >ChangeLog.tmp \ + && git rev-list -n 1 HEAD >.last-cl-gen.tmp \ + && (echo; cat $(srcdir)/ChangeLog) >>ChangeLog.tmp \ + && mv -f ChangeLog.tmp $(srcdir)/ChangeLog \ + && mv -f .last-cl-gen.tmp $(srcdir)/.last-cl-gen \ + && rm -f ChangeLog.tmp; \ + fi + +EXTRA_DIST += .last-cl-gen diff --git a/build-aux/Makefile.am b/build-aux/Makefile.am index 6348a4b..82a0d8f 100644 --- a/build-aux/Makefile.am +++ b/build-aux/Makefile.am @@ -20,4 +20,5 @@ STANDARD_TOOLS = \ missing \ mkinstalldirs -SPECIFIC_TOOLS = +SPECIFIC_TOOLS = \ + gitlog-to-changelog diff --git a/build-aux/gitlog-to-changelog b/build-aux/gitlog-to-changelog new file mode 100755 index 0000000..e02d34c --- /dev/null +++ b/build-aux/gitlog-to-changelog @@ -0,0 +1,432 @@ +eval '(exit $?0)' && eval 'exec perl -wS "$0" ${1+"$@"}' + & eval 'exec perl -wS "$0" $argv:q' + if 0; +# Convert git log output to ChangeLog format. + +my $VERSION = '2012-07-29 06:11'; # UTC +# The definition above must lie within the first 8 lines in order +# for the Emacs time-stamp write hook (at end) to update it. +# If you change this file with Emacs, please let the write hook +# do its job. Otherwise, update this string manually. + +# Copyright (C) 2008-2013 Free Software Foundation, Inc. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Written by Jim Meyering + +use strict; +use warnings; +use Getopt::Long; +use POSIX qw(strftime); + +(my $ME = $0) =~ s|.*/||; + +# use File::Coda; # http://meyering.net/code/Coda/ +END { + defined fileno STDOUT or return; + close STDOUT and return; + warn "$ME: failed to close standard output: $!\n"; + $? ||= 1; +} + +sub usage ($) +{ + my ($exit_code) = @_; + my $STREAM = ($exit_code == 0 ? *STDOUT : *STDERR); + if ($exit_code != 0) + { + print $STREAM "Try '$ME --help' for more information.\n"; + } + else + { + print $STREAM <<EOF; +Usage: $ME [OPTIONS] [ARGS] + +Convert git log output to ChangeLog format. If present, any ARGS +are passed to "git log". To avoid ARGS being parsed as options to +$ME, they may be preceded by '--'. + +OPTIONS: + + --amend=FILE FILE maps from an SHA1 to perl code (i.e., s/old/new/) that + makes a change to SHA1's commit log text or metadata. + --append-dot append a dot to the first line of each commit message if + there is no other punctuation or blank at the end. + --no-cluster never cluster commit messages under the same date/author + header; the default is to cluster adjacent commit messages + if their headers are the same and neither commit message + contains multiple paragraphs. + --srcdir=DIR the root of the source tree, from which the .git/ + directory can be derived. + --since=DATE convert only the logs since DATE; + the default is to convert all log entries. + --format=FMT set format string for commit subject and body; + see 'man git-log' for the list of format metacharacters; + the default is '%s%n%b%n' + --strip-tab remove one additional leading TAB from commit message lines. + --strip-cherry-pick remove data inserted by "git cherry-pick"; + this includes the "cherry picked from commit ..." line, + and the possible final "Conflicts:" paragraph. + --help display this help and exit + --version output version information and exit + +EXAMPLE: + + $ME --since=2008-01-01 > ChangeLog + $ME -- -n 5 foo > last-5-commits-to-branch-foo + +SPECIAL SYNTAX: + +The following types of strings are interpreted specially when they appear +at the beginning of a log message line. They are not copied to the output. + + Copyright-paperwork-exempt: Yes + Append the "(tiny change)" notation to the usual "date name email" + ChangeLog header to mark a change that does not require a copyright + assignment. + Co-authored-by: Joe User <user\(a)example.com> + List the specified name and email address on a second + ChangeLog header, denoting a co-author. + Signed-off-by: Joe User <user\(a)example.com> + These lines are simply elided. + +In a FILE specified via --amend, comment lines (starting with "#") are ignored. +FILE must consist of <SHA,CODE+> pairs where SHA is a 40-byte SHA1 (alone on +a line) referring to a commit in the current project, and CODE refers to one +or more consecutive lines of Perl code. Pairs must be separated by one or +more blank line. + +Here is sample input for use with --amend=FILE, from coreutils: + +3a169f4c5d9159283548178668d2fae6fced3030 +# fix typo in title: +s/all tile types/all file types/ + +1379ed974f1fa39b12e2ffab18b3f7a607082202 +# Due to a bug in vc-dwim, I mis-attributed a patch by Paul to myself. +# Change the author to be Paul. Note the escaped "@": +s,Jim .*>,Paul Eggert <eggert\\\(a)cs.ucla.edu>, + +EOF + } + exit $exit_code; +} + +# If the string $S is a well-behaved file name, simply return it. +# If it contains white space, quotes, etc., quote it, and return the new string. +sub shell_quote($) +{ + my ($s) = @_; + if ($s =~ m![^\w+/.,-]!) + { + # Convert each single quote to '\'' + $s =~ s/\'/\'\\\'\'/g; + # Then single quote the string. + $s = "'$s'"; + } + return $s; +} + +sub quoted_cmd(@) +{ + return join (' ', map {shell_quote $_} @_); +} + +# Parse file F. +# Comment lines (starting with "#") are ignored. +# F must consist of <SHA,CODE+> pairs where SHA is a 40-byte SHA1 +# (alone on a line) referring to a commit in the current project, and +# CODE refers to one or more consecutive lines of Perl code. +# Pairs must be separated by one or more blank line. +sub parse_amend_file($) +{ + my ($f) = @_; + + open F, '<', $f + or die "$ME: $f: failed to open for reading: $!\n"; + + my $fail; + my $h = {}; + my $in_code = 0; + my $sha; + while (defined (my $line = <F>)) + { + $line =~ /^\#/ + and next; + chomp $line; + $line eq '' + and $in_code = 0, next; + + if (!$in_code) + { + $line =~ /^([0-9a-fA-F]{40})$/ + or (warn "$ME: $f:$.: invalid line; expected an SHA1\n"), + $fail = 1, next; + $sha = lc $1; + $in_code = 1; + exists $h->{$sha} + and (warn "$ME: $f:$.: duplicate SHA1\n"), + $fail = 1, next; + } + else + { + $h->{$sha} ||= ''; + $h->{$sha} .= "$line\n"; + } + } + close F; + + $fail + and exit 1; + + return $h; +} + +# git_dir_option $SRCDIR +# +# From $SRCDIR, the --git-dir option to pass to git (none if $SRCDIR +# is undef). Return as a list (0 or 1 element). +sub git_dir_option($) +{ + my ($srcdir) = @_; + my @res = (); + if (defined $srcdir) + { + my $qdir = shell_quote $srcdir; + my $cmd = "cd $qdir && git rev-parse --show-toplevel"; + my $qcmd = shell_quote $cmd; + my $git_dir = qx($cmd); + defined $git_dir + or die "$ME: cannot run $qcmd: $!\n"; + $? == 0 + or die "$ME: $qcmd had unexpected exit code or signal ($?)\n"; + chomp $git_dir; + push @res, "--git-dir=$git_dir/.git"; + } + @res; +} + +{ + my $since_date; + my $format_string = '%s%n%b%n'; + my $amend_file; + my $append_dot = 0; + my $cluster = 1; + my $strip_tab = 0; + my $strip_cherry_pick = 0; + my $srcdir; + GetOptions + ( + help => sub { usage 0 }, + version => sub { print "$ME version $VERSION\n"; exit }, + 'since=s' => \$since_date, + 'format=s' => \$format_string, + 'amend=s' => \$amend_file, + 'append-dot' => \$append_dot, + 'cluster!' => \$cluster, + 'strip-tab' => \$strip_tab, + 'strip-cherry-pick' => \$strip_cherry_pick, + 'srcdir=s' => \$srcdir, + ) or usage 1; + + defined $since_date + and unshift @ARGV, "--since=$since_date"; + + # This is a hash that maps an SHA1 to perl code (i.e., s/old/new/) + # that makes a correction in the log or attribution of that commit. + my $amend_code = defined $amend_file ? parse_amend_file $amend_file : {}; + + my @cmd = ('git', + git_dir_option $srcdir, + qw(log --log-size), + '--pretty=format:%H:%ct %an <%ae>%n%n'.$format_string, @ARGV); + open PIPE, '-|', @cmd + or die ("$ME: failed to run '". quoted_cmd (@cmd) ."': $!\n" + . "(Is your Git too old? Version 1.5.1 or later is required.)\n"); + + my $prev_multi_paragraph; + my $prev_date_line = ''; + my @prev_coauthors = (); + while (1) + { + defined (my $in = <PIPE>) + or last; + $in =~ /^log size (\d+)$/ + or die "$ME:$.: Invalid line (expected log size):\n$in"; + my $log_nbytes = $1; + + my $log; + my $n_read = read PIPE, $log, $log_nbytes; + $n_read == $log_nbytes + or die "$ME:$.: unexpected EOF\n"; + + # Extract leading hash. + my ($sha, $rest) = split ':', $log, 2; + defined $sha + or die "$ME:$.: malformed log entry\n"; + $sha =~ /^[0-9a-fA-F]{40}$/ + or die "$ME:$.: invalid SHA1: $sha\n"; + + # If this commit's log requires any transformation, do it now. + my $code = $amend_code->{$sha}; + if (defined $code) + { + eval 'use Safe'; + my $s = new Safe; + # Put the unpreprocessed entry into "$_". + $_ = $rest; + + # Let $code operate on it, safely. + my $r = $s->reval("$code") + or die "$ME:$.:$sha: failed to eval \"$code\":\n$@\n"; + + # Note that we've used this entry. + delete $amend_code->{$sha}; + + # Update $rest upon success. + $rest = $_; + } + + # Remove lines inserted by "git cherry-pick". + if ($strip_cherry_pick) + { + $rest =~ s/^\s*Conflicts:\n.*//sm; + $rest =~ s/^\s*$cherry picked from commit [\da-f]+$\n//m; + } + + my @line = split "\n", $rest; + my $author_line = shift @line; + defined $author_line + or die "$ME:$.: unexpected EOF\n"; + $author_line =~ /^(\d+) (.*>)$/ + or die "$ME:$.: Invalid line " + . "(expected date/author/email):\n$author_line\n"; + + # Format 'Copyright-paperwork-exempt: Yes' as a standard ChangeLog + # `(tiny change)' annotation. + my $tiny = (grep (/^Copyright-paperwork-exempt:\s+[Yy]es$/, @line) + ? ' (tiny change)' : ''); + + my $date_line = sprintf "%s %s$tiny\n", + strftime ("%F", localtime ($1)), $2; + + my @coauthors = grep /^Co-authored-by:.*$/, @line; + # Omit meta-data lines we've already interpreted. + @line = grep !/^(?:Signed-off-by:[ ].*>$ + |Co-authored-by:[ ] + |Copyright-paperwork-exempt:[ ] + )/x, @line; + + # Remove leading and trailing blank lines. + if (@line) + { + while ($line[0] =~ /^\s*$/) { shift @line; } + while ($line[$#line] =~ /^\s*$/) { pop @line; } + } + + # Record whether there are two or more paragraphs. + my $multi_paragraph = grep /^\s*$/, @line; + + # Format 'Co-authored-by: A U Thor <email(a)example.com>' lines in + # standard multi-author ChangeLog format. + for (@coauthors) + { + s/^Co-authored-by:\s*/\t /; + s/\s*</ </; + + /<.*?@.*\..*>/ + or warn "$ME: warning: missing email address for " + . substr ($_, 5) . "\n"; + } + + # If clustering of commit messages has been disabled, if this header + # would be different from the previous date/name/email/coauthors header, + # or if this or the previous entry consists of two or more paragraphs, + # then print the header. + if ( ! $cluster + || $date_line ne $prev_date_line + || "@coauthors" ne "@prev_coauthors" + || $multi_paragraph + || $prev_multi_paragraph) + { + $prev_date_line eq '' + or print "\n"; + print $date_line; + @coauthors + and print join ("\n", @coauthors), "\n"; + } + $prev_date_line = $date_line; + @prev_coauthors = @coauthors; + $prev_multi_paragraph = $multi_paragraph; + + # If there were any lines + if (@line == 0) + { + warn "$ME: warning: empty commit message:\n $date_line\n"; + } + else + { + if ($append_dot) + { + # If the first line of the message has enough room, then + if (length $line[0] < 72) + { + # append a dot if there is no other punctuation or blank + # at the end. + $line[0] =~ /[[:punct:]\s]$/ + or $line[0] .= '.'; + } + } + + # Remove one additional leading TAB from each line. + $strip_tab + and map { s/^\t// } @line; + + # Prefix each non-empty line with a TAB. + @line = map { length $_ ? "\t$_" : '' } @line; + + print "\n", join ("\n", @line), "\n"; + } + + defined ($in = <PIPE>) + or last; + $in ne "\n" + and die "$ME:$.: unexpected line:\n$in"; + } + + close PIPE + or die "$ME: error closing pipe from " . quoted_cmd (@cmd) . "\n"; + # FIXME-someday: include $PROCESS_STATUS in the diagnostic + + # Complain about any unused entry in the --amend=F specified file. + my $fail = 0; + foreach my $sha (keys %$amend_code) + { + warn "$ME:$amend_file: unused entry: $sha\n"; + $fail = 1; + } + + exit $fail; +} + +# Local Variables: +# mode: perl +# indent-tabs-mode: nil +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "my $VERSION = '" +# time-stamp-format: "%:y-%02m-%02d %02H:%02M" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "'; # UTC" +# End: diff --git a/gnulib.modules b/gnulib.modules index 756e435..9f04b2e 100644 --- a/gnulib.modules +++ b/gnulib.modules @@ -1,4 +1,5 @@ -# List of gnulib modules needed for GNU tar. +# List of gnulib modules needed for Nolimips. # A module name per line. Empty lines and comments are ignored. +gitlog-to-changelog stdint -- 1.7.10.4

1 0

nolimips: nolimips-0.9-23-gf47d3c5 Require Automake 1.11 instead of 1.12, as Debian 7 ships the former only.
by Roland Levillain 23 Sep '13

23 Sep '13

* configure.ac: Here. --- configure.ac | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configure.ac b/configure.ac index 96bd7ab..96833cf 100644 --- a/configure.ac +++ b/configure.ac @@ -13,7 +13,7 @@ AC_INIT([Nolimips], [0.9a], [projects(a)lrde.epita.fr] AC_CONFIG_AUX_DIR([build-aux]) # Initialize automake. -AM_INIT_AUTOMAKE([foreign 1.12 silent-rules dist-bzip2]) +AM_INIT_AUTOMAKE([foreign 1.11 silent-rules dist-bzip2]) AM_SILENT_RULES([yes]) ## Development tools ------------------- -- 1.7.10.4

1 0